AUTOMATOR I POWDER METAL PRESS AUTOMATION CONTROL:
The Automator I Powder Metal Press Control is a modular rack design control system using a resolver for positioning. Look at the features that come standard with the Automator I.

Rack system with four open slots.
Remote operator interface can be mounted up to 100’ from rack system.
Eight Programmable automation inputs that can be programmed.
Eight Programmable Automation Outputs that can be programmed. 
24VDC at 1A for sensors and aux equipment
Heavy Duty Industrial Resolver

Choose any option now or add options later in field.

OSHA, ANSI, MPIF and CSA compliant Press Control.
Safety Sensor Input Card.
Programmable Limit Switch Output Card.
Load Monitor Card.
Ball Screw Feeder.
Multi-Axis Controller.
Over 65 inputs/outputs.

Rack system with four open slots.

• The rack system consists of a power block with 5vdc, 24vdc and relay modules with a cpu module in the main block along with four open slots for optional modules.
• Plug in terminal blocks w/coil & contact status indicators.
• Chain break detector and programmable motion detect.
• Set-up and remote reset inputs.
• 250 job memory regardless of options (500 optional)
• Real Time Clock.
• Programmable High and Low RPM limits.
• Tool List with programmable tool number and name.
• Real Brake Stop Time monitor with 90° stop time test, programmable brake warning, and max brake stop time.
• Hour Meter
• Stroke and Part counter with programmable preset.
• Total hits counter with each job.
• Relay Status LED’s.
• Optically Isolated Inputs and Outputs.

Remote operator interface can be mounted up to 100’ from rack system.

• A six inch LCD screen with key pad to manuever thru programming your options.
• Single comminication cable for easy remote installation.
• Displays position and tach.
• Program security codes selectable for all settings.
• On-screen diagnostic status of inputs, outputs, resolver and more.
• On screen help.
• Fault history.

Eight Programmable automation inputs that can be programmed.

• Link to Automation Outputs.
• Monitor Static Events.
• Names, programmable.
• Summary Screen.

Eight Programmable Automation Outputs that can be programmed. 

• Three Timers.
• Five Programmable Limit Switches.
• Choice for each output to make global to all jobs.
• Names are programmable.
• Summary Screen.

OSHA, ANSI, MPIF and CSA compliant Press Control.

• Safety Clutch/Brake Control Card.
• Front and Rear Guard Inputs with Muting.
• Interrupt Stroke Mode.
• Continuous Delay Input with Indicator Light Input.
• Micro Inch.
• Speed Compensated Top Stop.

Safety Sensor Input Card.

• 8-16 Inputs (see AutomatorII for up to 32 inputs)
• Static or Cyclical.
• Fault Output to Immediate Stop, Top Stop, Aux1 or Aux2.
• Names are Programmable.
• Summary Screen.

Programmable Limit Switch Output Card.

• Up to 24 PLS Outputs.
• Summary Screen.

Load Monitor Card.

• Programmable Monitoring.
• Each Point and Total Tonnage Display.
• High and Reverse Tonnage Display.
• Low Alarms May be Disabled.
• Up to Four Points with Sensors and Mounting Hardware.

Ball Screw Feeder.

• Programmable Start Position and End Feed Cycle.
• Programmable Start/Push Crank Angle.
• Feed Speed Control.
• Programmable Bump Position with Separate Speed Control.
• Programmable Shake Position.

• Programmable Shake Length and Number of Shakes.

Multi-Axis Controller.

• Up to Six Axis (Top Ram-DP Fill-Dp Mold Stop-DP Ejection-CR Mold Stop-Under Fill).
• Programmable Adjust.
• Programmable Pre-Set.
• Programmable High and Low Limits.
• Programmable Drift.

Over 65 inputs/outputs.

• Automator I has in excess of 65 inputs/outputs that you can easily trouble shoot directly from the operator interface screen with the status displays of any module. An indicator for each terminal on a module I/O will activate when the I/O is active. You can also see the last number of faults that occurred on each module.