PBC-1000 PRESS BRAKE CONTROL:
Look at some of the standard features of the PBC Press Brake Control:

Air Clutch or Mechanical Clutch Brake.
Dual Processor Press Clutch/Brake Control.
Interrupted Stroke Mode w/Indicator.
Rotary Cam Limit Switch Safety Monitor.
Self Diagnostics.

• Brake Monitor.
• Anti-Repeat.
• Anti-Tie Down.
• Auxilliary Inputs for Top and Immediate Stop.
• Clutch Pressure Switch Input.
• On Board Redundant Power Supplies.
• Light Guard Input.
• Light Guard Mute.
• Mute Indicator Output. 
• Hand/Foot Input.
• Hand to Foot Treadle Input. 
• Off, Inch, Single and Continuous Modes.
• Stroke Stop Mode.
• Input Status LEDs.
• Relay Coil Status LEDs.
• Relay Contact Status LEDs.
• Optically Isolated Inputs and Outputs.
• 24 vdc Power for External Devices.
• Plug-in Terminals.
• Fault Message Display Center.
• Ground Indicator.
• Motion Detect.
• Speed Check.

Press Control/Operator Station in One.
Remote Message Center.
Custom Fault Messages.
Motor Controls/Press Control in One.
Extra Stop Inputs.
Two Speed for Air Clutch.

Air Clutch or Mechanical Clutch Brake.

• The PBC1000 can be used on an air clutch brake that is operated with  two palm buttons or foot switch and  on mechanical press brakes with a mechanical foot pedal.

Dual Processor Press Clutch/Brake Control.

• The PBC1000 press clutch/brake press control meets or exceeds ANSI B11.1, B11.3, B11.16 (MPIF#47),  B11.19 and OSHA 1910.217 including control reliability. Self- checking dual logic controllers constantly check each other for proper operation and component failure.  Dual power supplies and dual relays provide for even more safety.  The actual contacts switching the solenoid valves are monitored to confirm proper operation. If the controllers or relays do not agree, press initiation is inhibited. The systems are designed so that a single fault in any of its parts does not lead to the loss of safety function.  A dedicated control eliminates the possibility of reprogramming or bypassing safety features.  

Interrupted Stroke Mode w/Indicator.

• Provides a quick and easy way to resume production when an interrupted stroke occurs. When the press is stopped before completion of a normal stroke, the red indicator light will illuminate and the mode automatically changes to the Inch mode. The Message Center will display the cause of the interrupted stroke eliminating any guesswork. After the press has been brought to the top position, the PBC1000 automatically returns to the original operating mode. Production is resumed quickly and easily.