top of page


Low Cost Resolver based safety Press Brake control

safety press brake control
 Standard 12" x 12" x 6" enclosure.
Custom sizes available to your specifications.


The CIECO PBC1100R Press Brake Control meets or exceeds ANSI B11.1, B11.16 (MPIF#47), B11.19, OSHA 1910.217 and CSA Z142.02 regulations including control reliability.  All contained in a 12 x 12 x 6 enclosure, the self-checking dual logic controllers constantly check each other for proper operation and component failure.  

All CIECO controls can be provided in any size box with additional hardware as needed. From complete turn-key systems with motor controls to just a few extra buttons for ancillary functions. Tell us what you need and we can provide a package that perfectly fits your application.

Request a manual

​Standard Features        

  • OSHA/ANSI/CSA Compliant Press Clutch/Brake Control

  • Resolver based eliminates the need for a mechanical rotary limit switch, allowing for all timing adjustments to be made at the keypad.

  • Fault message display provides real English fault messages eliminating the need to look up fault codes.

  • OSHA, ANSI, and CSA compliant

  • Air Clutch or Mechanical Clutch Brake. 

  • Dual Processor Press Clutch/Brake Control. 

  • Interrupted Stroke Mode w/Indicator. 

  • PCI-100 Operator Interface with plain English messages.

  • Speed Compensated Top Stop.

  • Real Brake Stop Time Monitor.

  • Four Programmable Limit Switch Outputs.

  • Stroke and Position Display.

  • Parts Counter with Batch Count.

  • Total Hits Counter.

  • Self Diagnostics.

  • Anti-Repeat

  • Anti-Tie Down

  • Key Pad Reset Button.

  • Supervisor Code.

  • Extra Input for Immediate Stop.

  • Air Pressure Switch Input.

  • On Board Redundant Power Supplies.

  • Light Guard Input.

  • Light Guard Mute.

  • Mute Indicator Output. 

  • Hand/Foot Input.

  • Hand to Foot.

  • Treadle Input. 

  • Off/Inch/Single/Continuous Modes.

  • Stroke-Stop Mode.

  • Input Status LEDs.

  • Relay Coil Status LEDs.

  • Relay Contact Status LEDs.

  • Optically Isolated Inputs and Outputs.

  • 24 vdc Power for External Devices.

  • Plug-in Terminals.

  • High and Low RPM Settings.

  • Motion Detect.

  • Speed Check.

  • Status Display.

  • Auxiliary Stop Output.

  • Enclosure Door Lock.

  • Ground Indicator.​

Optional Features

  • Custom Fault Messages: Spare fault inputs can be assigned with names relevant to your application. 

  • Extra Stop Inputs: Additional T-Stop or Immediate stop inputs can be added.

  • Custom layout: Different sized enclosures such as consoles with specified key-switches and buttons. In most cases custom enclosure layouts do NOT incur additional engineering charges.

  • Motor Controls: Complete turn-key systems with motor controls and other hardware relevant to your application.

bottom of page